Timer Operations - JVC CA-MXDK11 Instructions Manual

Remote Control

Timer Operations

You need to set the built-in clock before using timer
functions (see page 14) except Sleep Timer.
Setting the Timer
Using Daily Timer, you can wake up with your favorite
music. On the other hand, with Recording Timer, you can
make a tape of a radio broadcast.
• To go back to the previous step, press CANCEL while
holding SHIFT.
1
2
Select one of the timer setting modes—ON for Daily
Timer or Recording Timer.
Daily Timer
Canceled
Ex.: Daily Timer
Make the timer setting as you want.
Repeat the procedure for the following settings until finished:
1 Set the hour then minute for on-time.
2 Set the hour then minute for off-time.
3 Select the playback source.
• For Daily Timer, you can select from "TUNER FM,"
"TUNER AM," "DISC," "TAPE-A," "TAPE-B"
and "AUX."
• For Recording Timer, you can select from
"TUNER FM" and "TUNER AM."
EX.: When "TUNER FM" is selected for Daily Timer.
4 Select a preset station for "TUNER FM" and
"TUNER AM," or select a group and track
number for "DISC."
5 For Daily Timer: Select the volume level.
• You can select the volume level ("VOLUME 5,"
"VOLUME 10," "VOLUME 15" and "VOLUME --").
If you select "VOLUME --," the volume is set to the
last level when the System has been turned off.
Recording Timer
(time)
Clock setting
(time)
Continued on the next page...
32