Listening To Fm And Am Broadcasts; Setting The Am Tuner Interval Spacing; Tuning In A Station - JVC CA-MD70 Instructions Manual

Listening to FM and AM Broadcasts

Amplifier/Tuner
MULTI JOG
CANCEL
When using the number buttons on the remote control,
make sure that they are ready for tuner operations.
• Pressing FM/AM on the remote control makes the
number buttons ready for tuner operations.
• Check the AM tuner interval spacing (9 kHz or 10 kHz)
for your area (see below).

Setting the AM Tuner Interval Spacing

Some countries space AM stations 9 kHz apart, and some
countries use 10 kHz spacing.
When shipped, the built-in AM tuner is set to 9 kHz
spacing.
To set the AM tuner to the 10 kHz spacing, be sure that
the unit is turned off, but is plugged into a wall outlet. Hold
down > of the tuner control and then press
To set it back to the 9 kHz spacing, be sure that the unit is
turned off, but is plugged into a wall outlet.
Hold down < of the tuner control and then press
FM/AM
Tuner control
SET
(– / + / < / >)
.
.
– 13 –
Remote control
MD
TITLE
INPUT
MARK
1
GHI
4
Number
PQRS
buttons
7
10
FM MODE
FM MODE
FM/AM
FM/AM
MD
REC PAUSE
FADE MUTING
VOLUME

Tuning in a Station

1
Press FM/AM.
The unit automatically turns on and tunes in the
previously tuned station (either FM or AM).
• Each time you press the button, the band alternates
between FM and AM.
2
On the unit:
Press and hold + or – of the tuner control buttons.
On the remote control:
Press and hold % or fi of the tuner control buttons.
The unit starts searching stations and stops when a
station of sufficient signal strength is tuned in.
If a program is broadcast in stereo, the STEREO
indicator also lights.
To stop during searching, press + / – (or % / fi) of the
tuner control buttons again.
When you press + / – (or % / fi) briefly and
repeatedly
The frequency changes step by step.
To change the FM reception mode
When an FM stereo broadcast is hard to receive or noisy,
press FM MODE on the remote control so that "MONO"
appears in the main display. Reception improves.
To restore the stereo effect, press FM MODE again so
that "AUTO" appears in the main display.
In this stereo mode, you can hear stereo sounds when a
program is broadcast in stereo.
PLAY
MODE
SLEEP
ABC DEF
2 3
DISPLAY
/CHARA
JKL MNO
5 6
CANCEL
TUV WXYZ
8 9
CANCEL
SET
+ 10
0 SET
SOUND BASS ENTER
TAPE AUX CD3
MD CD2
CD CD1
REPEAT
Tuner control
(% / fi/ @ / #)