Manual Editing/Setup Section - Sony PVE-500 Operating Instructions Manual

Control Panel
* # # - - ' S *
-
.
,-
S w>..:+#' ~ ,-*
~ ~ ~ : L - ~ ~ * ~ > ~ * - , : : ~ ~ ~ ~ ~ ~ ~ ~
Manual editinglsetup section
i
@
RECISTORE (ENTRY
+
REC) button
@
EDITiSETUP (ENTRY
+
EDIT) button
Manual editing/selup section
@
RECISTORE (ENTRY
+
REC) button
REC (record): Press to put the unit into E-E
mode
1).
While you keep the button pressed, the
recorder's video, audio 1 and audio 2 input
signals are output to the monitor but not
recorded.
For manual editing, press this button togethei
with the PLAY hutton
CD
in the recorder
operation control section at the point where you
wish to begin recording.
STORE (ENTRY
+
REC): If the unit is in
internal
EDL mode (see
pnge
7-3(E)), edit data
is saved in the unit's internal memory. If this
button is pressed while you are using the setup
menu, setup data b r the current menu item is
written to the unit's EEPROM2).
@
EDITISETUP (ENTRY
+
EDIT) button
EDIT: Press to put the unit into E-E mode, using
the edit mode set witli the edit mode buttons.
While you keep the button pressed, the
recorder's input signals selected by the edit
rnode are output to the monitor but not
recorded.
For manual editing, press this blitton togethei
with the PLAY button
CD
in the recorder
operation control section at the point where you
wish to begin recording.
SETUP (ENTRY
+
EDIT): Press to cal1 up the
sexch dial setup menir (setup mode).
1)
E-E: Electric-to-Electric
2)
EEPROM: Electiically erasable programmable ROM
2-8
(E)
1
Chapter 2 Names and Functions of Pans