Sony PVE-500 Operating Instructions Manual page 2

Editing control unit
Hide thumbs Also See for PVE-500:
Table of Contents

Advertisement

For the customers in Europe
This product with the CE markinq cornplies with both the
EMC Directive (891336lEEC) and the i o w Voltage
TO
prevent fire or shock hazard, do not
Directive (73123lEEC) issued by the Commission of the
expose the unit to rain or moist~re.
European Community.
This symbol 1 s intended to alert the
user to the presence of uninsulated
"dangerous voltage" within the
product's enciosure that may be of
sufflcient magnitude to constitute a
risk of electric shock to persons
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance
For
customers i n the U.S.A.
WARNING
This equipment has been tested and found to comply
with the limits for a Class
A digital device, pursuant to
Part 15 of the FCC Rules These limits are designed to
provide reasonable protectiori against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency eriergy and, if no!
installed and used in accordance with the instruction
manual, may cause harmfui interference to radio
communications Operation of this equipment in a
residential area is likely to cause harmfui interference in
which case the user will be required to correct the
interference at his own expense.
You are cautioned that any changes or modifications not
exptessly approved in this manual could void your
authority to operate this equipment,,
Compliance with these directives implies conformity to
the following European standards:
a
EN60065: Product Safety
EN55103-1: Electromagnetic interference (Emission)
EN55103-2: Electromagnetic Susceptibiiity (Imrnunity)
This product is inlended for use in the following
Electromagnetic Environment(s):
E l (residential), E2 (cornmercial and light industrial), E3
(urban outdoors) arid E4 (controlled EMC environment,
ex TV studio)
Pour les clients européens
Ce produit portarit la marque CE es1 conforme a la fois a
la Directive sur la compatibilité électromagnétique (EMC)
(8913361CEE) et a la Directive sur les basses tensions
(73123lCEE) émises par la Commission de la
Communauté européenne,
La conformite a ces directives implique la conformité aux
normes européennes suivantes:
EN60065: Securité des produits
EN55103-1: Interférences électrornagnétiques
(emission)
EN55103-2: Sensibilité électromagnetique (immunité)
Ce produit est prevu pour etre utilisé dans les
envirorinements électromagnétiques suivants:
E l (residentiel). E2 (cornmercial et industrie légere), E3
(urbain exterieur) et E4 (environnement EMC contr6lé
ex studio de télevision).
Für Kunden in Europa
Dieses Produkt besitzt die CE-Kennzeichnung und erfüllt
sowohl die EMV-Direktive (891336lEEC) als auch die
Direktive Niederspannung (73123lEEC) der EG-
Kommission,,
Die Erfüllung dieser Direktiven bedeutet Konformitat für
die folgenden Europaischen Normen:
EN60065: Produktsicherheit
EN55103-1: Elektromagnetische lnterferenz (Ernission)
EN551 03-2: Elektromagnetische Empfindlichkeit
(Immunitat)
Dieses Produkt ist für den Einsatz unter folgenden
elektromagnetischen Bedingungen ausgelegt:
E l (Wohnbereich), E2 (kommerzieiier und in
beschranktem Mane industrieller Bereich), E3
(Stadtbereich im Freien) und E4 (kontrollierter EMV.
Bereich,
z
B Fernsehstudio),
The shielded interface cable reconimended in this
manual must be used with this equipment in order to
comply with the limits for a digital device pursuant to
Subpart B of Part 15 of FCC ruies

Advertisement

Table of Contents
loading

Table of Contents