To Adjust A Split Audio In Point; To Display The Offset Of A Split Audio In Point - Sony PVE-500 Operating Instructions Manual

Setting Separate Audio and Video IN Points
-
Split Editing
, . . : . ;
>!*,
~
4sa. , w
=*c, * ***
:-.
,+e
s . . , . ,
- : -
.*..
, - "
-.-.
..,-.
....
-^.
<~
.,.,...,.$<>c..z: ..rz,\
;*:.;*.d
a:
.&v..,&we
: ~ < ~ ; A ~ ~ ~ > ~ 4 . ~ ~ ~ ~ ~ ~ ~ ~ ~ . ~ ~ ~ ~ ~ ~ : ~ ~ ~ ~
1
Select the channel fos insert editing
2
Select the player
3
Set the IN points for both player and recorder
These IN points become the video IN points
4
Press the AUDIO SPLIT button.
The button lights The IN indicators above the player and recorder time
counters begin to flash
5
Sexch for the scene where you wish to set the playes's audio IN point. When
you find it, press the player IN button togethes with the ENTRY button
A split audio IN point is set fbr the player.
The player
i N
indicatos stops flashing and lights. The recosdes
IN
indicator
goes out.
6
Press the AUDIO SPLIT button again.
The AUDIO SPLIT button stasts flashing, to indicate that a split audio iN point
has been set
' 7
Set the player or recosder OUT point.
The OUT point can be set and confirmed segxdless of the state of the AUDIO
SPLIT button.
8
~f necessary, conduct a preview
9
Press the AUTO EDIT button to execute the edit.
To adjust a split audio IN point
Repeat steps 4 to 6.
You cannot adjust a split audio
I N
point unless the AUDIO SPLIT button is lit.
To display the offset of a split audio IN point
Ve~ify that AUDIO SPLIT button is lit, then press the
i N
button together with the
OUT button.
The time counter of the VTR for which you set the split audio
i N
point displays the
diffesence between the split audio
IN
point and the video IN point.
It is not possible to use the I tnm buttons to adjust split audio IN and video
OUT points simultaneously.
To use split IN points in AIB rol1 editing
Follow the procedure explained above, but be mindful of the following points.
Source designations apply to both the FROM and TO sousces.
e
You can set split audio
i N
points for the FROM source or for the recorder, but
not fer both.
*
You need to set a transition time for effects.
1
6-8
(E)
1
Chapter 6 Advancsd
Editing