Compu Link; Linked Operation Of The Other Optional Components (Compu Link) - JVC CA-EX70 Instructions Manual

COMPU LINK

Linked Operation of the Other Optional Components (Compu Link)

The EX series components can be controlled under linked operation provided by the JVC's Compu
Link remote control system.
What is Compu Link
The world of single components, in which you purchase a cassette deck, CD player, amplifier and
other components separately and enjoy your own composition, is an effective means for pursuit of
high-quality reproduction. However, in terms of operability, the need of controlling components
independently makes their control complicated and their linked operation impossible. Then, isn't it
possible to combine single components and control them as simply as an integrated audio system?
The Compu Link remote control system is the response to such a requirement.
The components in the JVC EX series are equipped with jacks named COMPU LINK-3 (COMPU LINK
jacks). By connecting the COMPU LINK jacks of these components, they can be controlled simply
with a systematized, linked operation.
Compu Link connections
Using Compu Link cables, connect the COMPU LINK jacks of EX series components. Connect so that
the Compu Link cables can bridge all of the EX series components you have as shown below. The
components can be connected in any order.
Compu Link-3 features
The Compu Link-3 system of the EX series components makes the following operations possible.
Compu Link cables
RX-EX70 INTEGRATED AMPLIFIER / TUNER
S. A. BASS DIRECT
PHONES
STANDBY
POWER
Amplifier/tuner
RX-EX70
Shortcut playback
Simply selecting an input source of the amplifier/tuner starts playback of the selected source
component (CD player, MD recorder or cassette deck).
Also, even if you do not touch the amplifier/tuner, starting playback of a source component sets the
amplifier's input source automatically to the played component.
(See "Shortcut Playback" on page 41.)
A single remote control unit
The remote control unit provided with the units can also be used to control other EX series
components.
(See "Remote Control of the Other Optional Components" on page 43.)
Synchronized recording
Recording can be started automatically in synchronism with the start of playback of a source
component.
(See "Synchronized Recording" on page 45.)
Timer operation
The timer function built into the amplifier/tuner can be used to start recording or playback of other
components at the reserved time of the day or switch the power to the STANDBY mode in the
reserved time period.
40
CA-EX70
VOLUME XL-EX70 COMPACT DISC PLAYER
BAND
PLAY & EXCHANGE
INPUT
DOWN UP
KEY
STANDBY
MODE
POWER
CD player
XL-EX70
XM-EX90 MINIDISC RECORDER
/CANCEL
CD 3
DISC LOADING MECHANISM
CD 2
CD 1
SAMPLING RATE CONVERTER
STANDBY
REPEAT PLAY MODE
POWER
MD recorder
TD-EX90 CASSETTE DECK
/CANCEL
INPUT
REC PAUSE CD REC
REC LEVEL DOLBY
STANDBY
B DOLBY C REC NR
POWER
Cassette deck
REC PAUSE CD REC
REVERSE
MODE