JVC CA-EX70 Instructions Manual page 31

/CANCEL
PLAY MODE
4 Press ‹/8 to start program playback.
Program playback stops automatically after playing all
the programmed tracks.
To check the programmed tracks
Press 4 or ¢ on the remote control during stop mode.
Pressing ¢ shows programmed track numbers in the
programmed order.
Pressing 4 shows them in the reverse order.
Programmed tracks cannot be checked by pressing 4
•
or ¢ on the front panel.
To remove programmed tracks
Press &/CANCEL (or CANCEL on the remote control) during
stop mode.
Each time you press the button, a track is removed from
the end of the program.
If you make a mistake during programming
Press &/CANCEL (or CANCEL on the remote control) during
stop mode repeatedly to remove tracks from the end of the
program until you reach the mistake, then reprogram from
that point.
To cancel program playback
Press PLAY MODE repeatedly during stop mode to select a
different play mode.
The program remains in memory even after exiting the
program play mode.
• The program is cleared from memory if the power cord
is unplugged or there is a power failure.
When you remove a disc containing programmed
tracks
The tracks from that disc are cleared from the program.
To play the program repeatedly
Use the repeat play mode in combination with the program
play mode.
For details on the repeat mode, see page 33.
31
CA-EX70