JVC CA-EX70 Instructions Manual page 12

9
TAPE DIRECTION
Press to change the tape direction when
using the cassette deck.
p
4 1 (skip back) /
• Press to skip or search backward on the
CD player after pressing CD, CD1, CD2,
CD3, or PLAY MODE.
• Press to rewind on the cassette deck after
pressing TAPE or TAPE CONTROL.
• Press to select the preset channel after
pressing TUNER.
q
REC PAUSE
Press to set the cassette deck to record
pause mode.
w
7 (stop) /
• Press to stop playback on the CD player
after pressing CD, CD1, CD2, CD3, or PLAY
MODE.
• Press to stop playback or recording on the
cassette deck after pressing TAPE or TAPE
CONTROL.
• Press to tune manually to a lower
frequency after pressing TUNER.
e
VOLUME
Press up) to increase the volume.
Press (down) to decreases the volume.
r
FADE MUTING
Press to turn the volume all the way down.
To restore the volume, press it again.
t
¢ ¡ (skip forward) /
• Press to skip or search forward on the CD
player after pressing CD,CD1,CD2,CD3, or
PLAY MODE.
• Press to fastforward on the tape deck after
pressing TAPE or TAPE CONTROL.
• Press to select the preset channel after
pressing TUNER.
y
£ (play) /
• Press to start playback on the CD player
after pressing CD, CD1, CD2, CD3 or PLAY
MODE.
• Press to start playback on the cassette
deck after pressing TAPE or TAPE
CONTROL.
• Press to automatically tune to higher
frequencies after pressing TUNER.
u
TAPE CONTROL
Press to set the buttons on the remote to
operate the cassette deck.
i
SET
Press to set the preset channel, timer, clock, etc.
12
CA-EX70
o
CLOCK/TIMER
Press to set the timer or clock.
;
+/R, –/L
Press to set the BASS level, TREBLE level,
BALANCE, timer, clock, etc.
a
Source buttons
AUX: press to select the component
connected to the amplifier/tuner's AUX
jacks as the sound source.
TUNER: press to select the tuner as the
sound source and set some buttons
on the remote to operate the tuner.
Press repeatedly to switch the band
(FM or AM).
CD: press to select the CD player as the
sound source and make it start playback
of a loaded CD. Press to set some
buttons on the remote to operate the CD
player.
TAPE: press to select the cassette deck as
the sound source and make it start
playback of a loaded tape. Press to set
some buttons on the remote to
operate the cassette deck (when using
the cassette deck).
s
SLEEP
Press to set or release the sleep timer.