JVC CA-EX70 Instructions Manual page 10

Amplifier/tuner rear panel
1
CD input jacks
Connect to the ANALOG OUT jacks of the
CD player.
2
MD input/output jacks
Connect to the output/input jacks of the MD
recorder.
OUT (REC): Connect to the IN (REC) jacks of
IN (PLAY): Connect to the OUT (PLAY) jacks
of the MD recorder.
3
TAPE input/output jacks
Connect to the output/input jacks of the
cassette deck.
OUT (REC): Connect to the IN (REC) jacks of
IN (PLAY): Connect to the OUT (PLAY) jacks
of the cassette deck.
4
AUX input jacks
Connect to the audio output jacks of a VCR or
TV.
5
SUB-WOOFER OUT jack
Connect to the input jack of a subwoofer
amplifier or powered subwoofer.
6
Power cord
Connect to a wall power outlet.
7
COMPU LINK-3 (SYNCHRO) jacks
Connect each jack with the COMPU LINK-3
(SYNCHRO) jack of another component.
Either jack can be used for the connection.
8
SPEAKERS terminals
Connect speakers with rated impedance of 6
to 16 ohms.
9
ANTENNA terminals
Connect the FM and AM antennas.
10
CA-EX70
the MD recorder.
the cassette deck.
CD player rear panel
p
COMPU LINK-3 (SYNCHRO) jacks
Connect each jack with the COMPU LINK-3
(SYNCHRO) jack of another component.
Either jack can be used for the connection.
q
AC POWER CORD receptacle
Connect the provided AC power cord.
w
DIGITAL OUT jack
Connect to the DIGITAL IN jack of the MD
recorder using an optical digital cable.
When connecting to the XM-EX90 MD
recorder, connect to its DIGITAL IN 1 jack.
e
ANALOG OUT jacks
Connect to the CD input jacks on the
amplifier/tuner using the provided audio pin
cord.