Program Play Mode - JVC CA-EX70 Instructions Manual

Program Play Mode

This play mode lets you play tracks from up to 3 CDs in the order you desire.
PLAY MODE
30
CA-EX70
CD 3
CD 2
CD 1
PLAY MODE
1 Load CDs.
See "Loading CDs" on page 27.
2 Press PLAY MODE repeatedly to select
PROGRAM.
"PROGRAM" appears in the display and the PROGRAM
indicator lights up.
• If some tracks were previously programmed, the disc,
track, and program numbers of each track are
displayed.
DISC
Each time you press PLAY MODE, the play modes
switch as follows:
PROGRAM
• The CD player must be in stop mode when switching
the play modes. If necessary, press &/CANCEL to
stop playback before pressing PLAY MODE.
3 Program the tracks.
1 Press CD 1, CD 2 or CD 3 to select the disc
containing the track you want to program.
Blinks
Example) Selecting disc 2.
2 Select a track number by pressing 4 or ¢.
Blinks
Example) Selecting track 4.
3 Press PLAY MODE to register the track.
The display stops blinking and lights steadily, and the
program number is incremented by 1.
Notes
• Repeat steps 1 to 3 to program up to 32 tracks. If
you attempt to program more than 32 tracks "FULL"
appears in the display.
• Perform step 2 within 4 seconds of step 1. If 4
seconds elapse between any operations, the unit
automatically returns to the previous state.
• When using the remote control, see page 44.
Lights
PROGRAM
RANDOM
Off (Continuous play)
Program No.