Banner Paper Printing Function; Copy Paper; Applicable Paper; Printer Drivers And Supported Operating Systems - Konica Minolta magicolor 8650 User Manual

Function detail description
8.12

Banner paper printing function

By specifying the banner print settings on the control panel, allows you to print on the paper up to 1,200mm
feeded from the tray 1 (bypass tray).
In the following section, setting long paper and printing on it is referred to as banner paper printing.
8.12.1

Copy paper

Applicable paper

Paper width
210 to 297mm
8.12.2

Printer drivers and supported operating systems

The following drivers support banner paper printing:
- Konica Minolta PCL Printer Driver (PCL driver)
- Konica Minolta PostScript Printer Driver (PS driver)
8.12.3

Setting up the printer driver

Specify the output paper size as a custom paper size.
1
Click the Basic tab.
2
Select "Custom Size" from "Original Size" or "Paper Size".
The Custom Size Settings dialog box appears.
3
Specify the length and the width of the custom paper size according to the selected measurement unit.
4
Specify the paper type.
– If necessary, specify the other settings.
5
Click the [OK] button.
Note
For the Konica Minolta PCL Printer Driver, custom size setting can also be preregistered on the Initial
Setting tab in the printer driver activated from the Windows "Printer" window ("Printers and Faxes" for
Windows XP/Server 2003).
magicolor 8650
Paper length Paper type
457.3 to 1,200.0mm Thick paper 1, Thick paper 1 + Duplex 2nd Side, Thick paper2,
Thick paper2 + Duplex 2nd Side (127 to 210 g/m
8
2
)
8-45