THOMSON 780 (WL) User Manual page 27

To verify USB
connectivity in Windows
To install Mac USB
drivers
Device settings
E-DOC-CTC-20051017-0149 v1.0
The SpeedTouch™ USB connection is represented as a local network interface. You
can easily check this interface by opening the Network Connections window from
Windows' Control Panel.
You can find the required USB driver software on the Setup CD. The installation is
Plug and Play, meaning that installation requires almost no effort.
Proceed as follows:
1
Insert the blue USB cable into the SpeedTouch™ USB port marked with the
USB logo.
A USB logo looks like this:
2
Plug the other end of the USB cable into (one of) the USB port(s) of your
computer. In most cases your computer's USB port is marked with the same
USB symbol.
You can also connect your computer to the SpeedTouch™ via a USB
hub, provided that the hub is autonomously powered.
Mac OS X will automatically recognise the detection of a new port.
3
Make sure the SpeedTouch™ Setup CD is inserted, and then click OK.
4
In the Network window, click Apply Now.
Once you have connected a device, you can personalise its settings. For more
information, see " Device settings" on page 15.
Chapter 2
Local Network Setup
19