Multi-Projection; Preparing The Projector - Epson EB-G6750WU Installation Manual

Projecting Images
Screen type setting: 16:9
16:10
Auto or Normal
Full
Zoom
*
Native
* The image may differ depending on the resolution of the input signal.
Screen type setting: 16:10
16:10
Auto or Normal
16:9
Full
Aspect Ratio of Input Signal
16:9 4:3
Aspect Ratio of Input Signal
16:9 4:3
16:10
Zoom
Native *
* The image may differ depending on the resolution of the input signal.

Multi-Projection

Preparing the Projector

• Set the ID to the projector.
Press [Menu] button > Extended > Multi-Projection > Projector ID
When operating the projector, (1) set the remote control [ID] switch to
On, (2) hold down the [ID] button, (3) and then press the same number
button as the ID of the projector.
To check the projector's ID, press the [Help] button while holding
the [ID] button on the remote control to display the ID on the screen.
• Adjust the position of the projected image by using the direction of the
projector and lens shift.
s
• Set Color Mode to Multi-Projection with the [Color Mode] button on
the remote control (set to 3D Multi-Projection for 3D images).
Aspect Ratio of Input Signal
16:9 4:3
p.20
50