Projecting Images; Correcting Distortion In The Projected Image; Control Panel; Remote Control - Epson EB-G6750WU Installation Manual

Projecting Images

Correcting Distortion in the Projected Image

The following operations explain how to correct distortion in projected
images and how to switch between correction methods.

Control panel

Press the [ ] button. The selected correction method is executed. To
change the correction method, press the [
the [Esc] button.

Remote control

Perform in Geometric Correction from the Configuration menu.
Press [Menu] button > Settings > Geometric Correction
a
• When correcting distortion in the projected image, the screen size is
reduced.
• You cannot combine multiple adjustment methods. For example, if
you use H/V-Keystone to correct the projected image, you cannot
make additional corrections using Quick Corner.
] button, and then press

H/V-Keystone

Manually correct distortion in the horizontal and vertical directions
independently.
Correction range
When the lens shift is in the center, distortion can be corrected when the
angle of vertical and horizontal tilt of the projector is up to 30 degrees
against the screen (19 degrees when using the short throw zoom lens
ELPLU01).
Operations
a
Select H/V-Keystone from Geometric Correction.
43