Connecting Image Sources - Epson EB-G6750WU Installation Manual

Connecting Equipment

Connecting Image Sources

To project video images, connect using one of the following methods.
A
When using a commercially available video cable
Connect the video output port on the image source to the projector's Video port.
You can output audio from the projector by connecting the audio output port on the image source to the projector's Audio-L/R port using a commercially available audio cable.
B
When using a commercially available S-video cable
Connect the S-video output port on the image source to the projector's S-Video port.
You can output audio from the projector by connecting the audio output port on the image source to the projector's Audio-L/R port using a commercially available audio cable.
C
When using an optional component video cable (ELPKC19: D-sub/component converter)
Connect the component output port on the image source to the projector's Computer port.
You can output audio from the projector by connecting the audio output port on the image source to the projector's Audio1 port using a commercially available audio cable.
D
When using a commercially available component video cable (RCA) and a BNC/RCA adapter
Connect the component output port on the video equipment to the projector's BNC port (R/Cr/Pr, G/Y, B/Cb/Pb).
You can output audio from the projector by connecting the audio output port on the image source to the projector's Audio2 port using a commercially available audio cable.
E
When using a commercially available HDMI cable
Connect the HDMI port on the image source to the projector's HDMI port.
The image source's audio is also output from the projector.
36