MAEPF-22060-O
8
Getting Started (cont.)
Note: To avoid damage to the radio's surface,
installation and removal of the belt clip assembly
should be done with the battery removed from
the radio.
Installing the Belt Clip
1.
Insert a pencil or equivalent size instrument
between the inside of the belt clip and the metal
clip assembly so as to hold the metal clip
p a r t i a l l y s p ru n g ( m e t a l c l i p s h o u l d b e
approximately parallel with the plastic portion of
the belt clip).
2.
Align the metal tabs of the belt clip with the
plastic slots of the battery housing.
3.
Slide the belt clip onto the battery, pushing firmly
until a click is heard.
4.
Remove the pencil from the clip.