Table of Contents
Advertisement
All Channel Stereo mode
This mode can reproduce a larger stereo sound field using all the
connected (and activated) speakers. This mode cannot be used
without activating the surround speakers.
• If headphones are connected or if the front speakers are
deactivated, "ALL CH STEREO" cannot be selected.
• The settings on the EFFECT ADJUST submenu are not valid for
"ALL CH STEREO."
Stereo Film and Monaural Film modes
In order to reproduce a more acoustic sound field in your listening
room while viewing stereo sound or monaural sound video software
(analog and 2-channel digital signals), you can use these modes.
The surround effect will be added, and the sound localization of
actor's words will be improved. This mode cannot be used when
the source is "DVD MULTI" or "EXT 7.1CH" and when multi-
channel digital signals are coming in.
STEREO FILM : To play back stereo video software
MONO FILM
: To play back monaural video software
When "STEREO FILM" or "MONO FILM" is used, sounds come
out of all the connected (and activated) speakers.
• If incoming signals changes from 2-channel digital signal to
another digital signal type, "STEREO FILM" or "MONO FILM"
is canceled and an appropriate Surround mode is activated.
Activating the DSP Modes
Perform the basic settings and adjustments using the Setup and
Adjustment Menus first (see pages 29 to 44).
Activating one of the DSP modes for a source automatically
recalls the memorized settings and adjustments.
IMPORTANT:
• When using the unit:
Press DOOR DOWN to use the buttons inside the front door.
DOOR
DOWN
To close the front door, press DOOR UP.
• When using the remote control:
Check the indication shown on the remote's display when you
press a button—this indicates the remote control operation mode
for a while.
LEARN
TRANSMIT
Ex. When you press DSP.
53
DVD
AUDIO
LEARN
TRANSMIT
TV/DBS
VCR 1
1. Select and play any sound source.
2. Press DSP repeatedly until the DSP mode you
want appears on the display.
• Each time you press the button, the DSP modes change as
follows:
DSP
On the unit
(inside the front door)
DGTL AUTO
L
C
R
SUBWFR
LFE
DIGITAL
DSP
LS
RS
=
=
LARGE HALL 1
LARGE HALL 2
=
=
OPERA HOUSE
=
=
DANCE CLUB
PAVILION
=
=
LARGE THEATER
=
=
STEREO FILM*
= (Back to the beginning)
*
When multi-channel signals come in, you cannot select
"STEREO FILM" and "MONO FILM."
Notes:
• When the surround speakers are deactivated, the 3D-PHONIC
processing is applied to the DSP modes except "ALL CH STEREO"
(the 3D-PHONIC indicator also lights up).
• If the Surround/THX mode is in use, it will be canceled when you
turn on the DSP mode.
To adjust the DSP effects
Using the 10 keys on the remote control, you can adjust the level of the
overall effect and the liveness (except for "ALL CH STEREO").
• Once you adjust the levels using the following procedure, the
adjustments you have done on the Adjustment Menu will be also
changed. (It is recommended to adjust the DSP effects using the
Adjustment Menu since you can adjust other elements as well.)
1. Press SOUND.
The 10 keys are activated for sound adjustments.
2. Press EFFECT repeatedly to adjust the level of
the overall effect (1 to 5).
3. Press LIVENESS repeatedly to adjust the
liveness (1 to 5).
To cancel the DSP modes
Press SURR/DSP OFF.
"SURROUND OFF" appears on the display.
SURR/DSP
OFF
On the unit
(inside the front door)
• When a pair of headphones is connected or when the front
speakers are deactivated, "HEADPHONE" will appear.
DSP
From the remote control
SPEAKERS
PARAMETRIC EQ
=
RECITAL HALL
=
CHURCH
LIVE CLUB
=
ALL CH STEREO
SMALL THEATER
MONO FILM*
SOUND
EFFECT
LIVENESS
SURR/DSP
OFF
From the remote control
1
MIDNIGHT
MODE
VOLUME
dB
3
6
Advertisement
Table of Contents
