Activating The Dsp Modes - JVC RX-6010VBK Service Manual

Activating the DSP Modes

You can use only one DSP mode at a time. When a DSP mode is
activated, another DSP mode is canceled if in use.
For Dolby Pro Logic, Dolby Digital, and DTS
Digital Surround
On the front panel:
1. Press SURROUND ON/OFF.
• Each time you press the button, the Dolby/
DTS Surround mode turns on and off
alternately.
2. Select and play a sound source.
• To enjoy Dolby Pro Logic, play back a software encoded with
Dolby Surround and labeled with
• To enjoy Dolby Digital, play back a software encoded with
Dolby Digital and labeled with
• To enjoy DTS Digital Surround, play back a software encoded
with DTS Digital Surround and labeled with
To cancel the Dolby/DTS Surround mode
Press SURROUND ON/OFF again.
("SURROUND OFF" appears on the display.)
From the remote control:
1. Press SURROUND.
• Each time you press the button,
the Dolby/DTS Surround mode turns on
and off alternately.
• You can also turn on Dolby/DTS Surround
mode by pressing SURROUND MODE.
2. Select and play a sound source.
• To enjoy Dolby Pro Logic, play back a software encoded with
Dolby Surround and labeled with
• To enjoy Dolby Digital, play back a software encoded with
Dolby Digital and labeled with
• To enjoy DTS Digital surround, play back a software encoded
with DTS Digital Surround and labeled with
To cancel the Dolby/DTS Surround mode
Press SURROUND again. ("SURROUND OFF"
appears on the display.)
SURROUND ON/OFF
mark.
DOLBY SURROUND
mark.
D I G I T A L
mark.
SURROUND ON/OFF
SURROUND
SURROUND
MODE
mark.
DOLBY SURROUND
mark.
D I G I T A L
mark.
SURROUND
SURROUND
MODE
For the other DSP modes
On the front panel:
1. Press DSP MODE repeatedly until
the mode you want appears on the
display.
• Each time you press the button, the DSP
modes change. (See page 20 for more
details.)
2. Select and play a sound source.
• To enjoy JVC Theater Surround, play back a software encoded
with Dolby Surround and labeled with
To cancel the DSP mode
Press DSP MODE repeatedly until "DSP OFF"
appears on the display.
From the remote control:
1. Press SURROUND MODE
repeatedly until the DSP mode you
want appears on the display.
• Each time you press the button, the DSP
modes change.
2. Select and play a sound source.
• To enjoy JVC Theater Surround, play back a software encoded
with Dolby Surround and labeled with
To cancel the DSP mode
Press SURROUND MODE repeatedly until
"DSP OFF" appears on the display.
DSP MODE
mark.
DOLBY SURROUND
DSP MODE
SURROUND
SURROUND
MODE
mark.
DOLBY SURROUND
SURROUND
SURROUND
MODE
24