Operation Through On-Screen Display Menus - JVC RX-DP20VSL Instructions Manual

IMPORTANT:
• When using the unit:
Press DOOR DOWN to use the buttons inside the front door.
DOOR
DOWN
To close the front door, press DOOR UP.
• When using the remote control:
Check the indication shown on the remote's display when you
press a button—this indicates the remote control operation mode
for a while.
LEARN
TRANSMIT
Ex. When you press SETUP MENU
The buttons for operating the menus are shown on the screen.
You can operate the menu with these buttons.
DVD
AUDIO
LEARN
TRANSMIT
TV/DBS VCR 1
Usable buttons
Usable buttons
Operation through On-Screen Display
Menus
To do the basic settings for this receiver, you can utilize the on-
screen display menus in order to finish important settings easily
while viewing these menus.
Menu operation buttons
• When no operation is done for about 1 minute, the on-screen menu
(as well as the indications in the unit's main display) will
disappear.
On the unit:
DOWN
/ TUNING∞
LEFT
SETUP MENU
/ PRESET∞
Button
To do
SETUP MENU
display or erase the Setup Menu.
select a submenu on the Setup Menu or an
DOWN/UP item on a submenu (downwards or
upwards).
SET move to the selected submenu screen.
LEFT/RIGHT select the desired setting on a submenu.
exit from menu operations or return to the
EXIT
previous menu.
From the remote control:
SETUP
MENU
SET
Button
To do
SETUP MENU
display or erase the Setup Menu.
select a submenu on the Setup Menu or an
fi / %
item on a submenu (downwards or
upwards).
SET move to the selected submenu screen.
@ / #
select the desired setting on a submenu.
exit from menu operations or return to the
EXIT
previous menu.
UP SET
/ TUNING5 / MEMORY
RIGHT EXIT
/ PRESET5 / FM MODE
(inside the front door)
EXIT
30