Table of Contents
Advertisement
Activating the Surround and THX Modes
Perform the basic settings and adjustments using the Setup and
Adjustment Menus first (see pages 29 to 44).
Activating the Surround mode and the THX mode for a source
automatically recalls the memorized settings and adjustments.
IMPORTANT:
• When using the unit:
Press DOOR DOWN to use the buttons inside the front door.
DOOR
DOWN
To close the front door, press DOOR UP.
• When using the remote control:
Check the indication shown on the remote's display when you
press a button—this indicates the remote control operation mode
for a while.
LEARN
TRANSMIT
Ex. When you press THX.
About Dialog Normalization
Dialog Normalization is one of the standard functions for Dolby
Digital and its level is encoded together with the audio signals.
With this function, the sound output level of Dolby Digital
software can be kept at almost the same level even if the
recording levels differ among software.
THX also has the same function and its own standard level,
which is different from that for Dolby Digital.
If you see a message in the main display that shows "DIAL.
NORM: XX (number)" this means that the source material that
you are listening to has been encoded at a higher or lower level
than normal. To keep the volume level consistent from program
to program, adjust the volume control by the amount (XX) in
this message.
• Ex: If the display reads "DIAL. NORM: +4", turn down the
volume control by 4 dB.
49
DVD
AUDIO
LEARN
TRANSMIT
TV/DBS
VCR 1
Activating the 7.1-channel reproduction
For multi-channel digital software, you can activate the 7.1-channel
reproduction mode.
• Once you have set 7.1-channel reproduction mode, it is stored in
memory and will be called up whenever you activate the Surround
mode or THX mode which the memorized 7.1-channel
reproduction mode can be applied to.
Press EX/ES/7.1 to select an appropriate setting for your
enjoyment.
The currently selected 7.1-channel reproduction mode appears on
the display.
• Each time you press the button, it changes as follows:
EX/ES/7.1
On the unit
(inside the front door)
DGTL AUTO
L
C
R
SUBWFR
LFE
DIGITAL
LS
RS
EXES7.1 OFF
EXES7.1 ON
EXES7.1 AUTO : According to the incoming signal, an
appropriate Surround mode is applied.
• For 6.1-channel encoded software,
7.1-channel reproduction is applied.
• For 5.1-channel (or less) encoded
software, 5.1-channel reproduction is
applied.
EXES7.1 ON
: Select to apply 7.1-channel reproduction to
both 5.1-channel and 6.1-channel encoded
software.
EXES7.1 OFF
: Select to cancel the 7.1-channel
reproduction.
Notes:
• When the Surround mode is deactivated, pressing EX/ES/7.1
will activate an appropriate Surround mode for multi-channel
digital software.
• When an analog or digital 2-channel source is playing with
Surround activated, you can adjust the 7.1-channel reproduction
mode and store the setting, but it will not affect the current
source.
• In the following cases, the EX/ES/7.1 button does not work.
("NO SURRBACK" appears on the display.)
– When "SURR BACK SP" is set to "NONE" (see page 32), or
– When "SPEAKER 2" is set to "BI-AMP OUT" (see page 37)
EX/ES/7.1
From the remote control
SPEAKERS
1
VOLUME
dB
EXES7.1 AUTO
Advertisement
Table of Contents
