Specifications - JVC RX-8020VBK Instructions Manual

Specifications

Amplifier
Audio
Audio Input Sensitivity/Impedance (1 kHz):
Audio Input (DIGITAL IN)* :
Audio Output Level:
Recording Output Level:
Signal-to-Noise Ratio ('66 IHF/'78 IHF):
Frequency Response (8 Ω):
RIAA Phono Equalization:
Video
Video Input Sensitivity/Impedance:
Composite video:
Component video:
Video Output Level:
Composite video:
Component video:
Synchronization:
Signal-to-Noise Ratio:
On-Screen System:
59
Output Power:
At Stereo operation:
Front channels:
At Surround operation:
Front channels:
Center channel:
Surround channels:
PHONO (MM):
DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS, CD, CDR, TAPE/MD:
Coaxial: DIGITAL 1 (DVD):
Optical: DIGITAL 2 (CD), DIGITAL 3 (TV), DIGITAL 4 (CDR):
*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with
sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).
USB: Revision 1.0, full-speed (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz)
PRE OUT
VCR 1, VCR 2, CDR, TAPE/MD:
Digital output: Optical: DIGITAL OUTPUT:
PHONO:
DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS, CD, CDR, TAPE/MD:
PHONO:
DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS, CD, CDR, TAPE/MD:
USB:
±1.0 dB (20 Hz to 20 kHz)
Bass boost: +6 dB ±1.0 dB at 100 Hz
DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS:
S-video: DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS:
DVD, DBS:
VCR 1, VCR 2, MONITOR OUT:
S-video: VCR 1, VCR 2, MONITOR OUT:
MONITOR OUT:
Negative
45 dB
NTSC
120 W per channel, min. RMS, driven into 8 Ω,
20 Hz to 20 kHz, with no more than 0.08% total
harmonic distortion.
100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no
more than 0.8% total harmonic distortion.
100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than
0.8% total harmonic distortion.
100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no
more than 0.8% total harmonic distortion.
2.5 mV/47 kΩ
200 mV/47 kΩ
0.5 V(p-p)/75 Ω
–21 dBm to –15 dBm (660 nm ±30 nm)
1.0 V
200 mV
Signal wave length: 660 nm
Output level: –21 dBm to –15 dBm
70 dB/78 dB (at REC OUT)
92 dB/80 dB
20 Hz to 20 kHz (±1 dB)
20 Hz to 100 kHz (+1 dB, –3 dB)
20 Hz to 20 kHz (+1 dB, –3 dB)
(Y: luminance):
(C: chrominance, burst):
(Y: luminance):
(P P ):
B/ R
(Y: luminance):
(C: chrominance, burst):
(Y: luminance):
(P P ):
B/ R
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.286 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.7 V(p-p)/75 Ω
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.286 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.7 V(p-p)/75 Ω