Table of Contents
Advertisement
Specifications
25
Amplifier
Output Power
At Stereo operation: 100 W per channel, min. RMS, both
channels driven into 8 Ω at 1 kHz, with no
more than 0.9% total harmonic distortion.
(IEC268-3/DIN)
At Surround operation:
Front Channel:
70 W per channel, min. RMS, driven into
8 Ω at 1 kHz, with no more than 0.8% total
harmonic distortion.
70 W, min. RMS, driven into 8 Ω at 1 kHz,
Center channel:
with no more than 0.8% total harmonic
distortion.
Rear channel:
70 W per channel, min. RMS, driven into
8 Ω at 1 kHz, with no more than 0.8% total
harmonic distortion.
Total Harmonic Distortion (8 Ω, 1 kHz):
0.8%* at 100 W output
(* Measured by JVC Audio Analysis
System)
Audio
Audio Input Sensitivity/Impedance (1 kHz):
2.7 mV/47 k Ω
PHONO (MM):
CD, TAPE/MD, VCR, DVD:
220 mV/47 k Ω
Audio Output Level: TAPE/MD, VCR 220 mV
Signal-to-Noise Ratio ('66 IHF/DIN):
PHONO:
70 dB/66 dB
CD, TAPE/MD, VCR, DVD:
87 dB/67 dB
Frequency Response (8 Ω):
PHONO:
20 Hz to 20 kHz (±1 dB)
CD, TAPE/MD, VCR, DVD:
20 Hz to 20 kHz (±1 dB)
RIAA Phono Equalization:
Video
Video Input Sensitivity/Impedance:
1V(p-p)/75 Ω
VCR, DVD:
Video Output Level:
VCR, MONITOR OUT: 1V(p-p)/75 Ω
Synchronization:
Negative
Signal-to-Noise Ratio: 45 dB
±1.0 dB (20 Hz to 20 kHz)
Advertisement
Table of Contents
