Operating Jvc's Audio/Video Components; Operating Audio Components - JVC RX-8020VBK Instructions Manual

Operating JVC's Audio/Video Components

You can operate JVC's audio and video components with this receiver's remote control, since control signals for JVC's
components are preset in the remote control.

Operating Audio Components

IMPORTANT:
To operate JVC's audio components using this remote control:
• You need to connect JVC's audio components through the COMPU
LINK (SYNCHRO) jacks (see page 43) in addition to the
connections using cables with RCA pin plugs (see pages 8 and 9).
• Aim the remote control directly at the remote sensor on the
receiver.
• If you use the buttons on the front panel or the menu function to
choose a source, the remote control will not operate that source.
To operate a source with the remote control, the source must be
selected using source selecting buttons on the remote control.
• To operate a cassette deck or MD recorder using the COMPU LINK
remote control system, set the source name correctly. (See page 17.)
• Refer also to the manuals supplied with your components.
A/V CONTROL RECEIVER
CATV/DBS
DVD DVD MULTI
TV/DBS VIDEO
VCR1
SURROUND
ANALOG
DIRECT BOOST
SOUND
DIMMER
∗
MUTING DIGITAL EQ
RETURN
CATV/DBS
CONTROL
CH/
TV/VIDEO
TEXT
DISPLAY MENU
REC
PAUSE
SLEEP
RM-SRX8020J
Note:
When you press one of the source selecting buttons, the
operation mode appears on the display window. For example,
the above illustration shows the remote control now works for
CD operation.
Buttons
FM/AM
CD
CDR
PHONO
TAPE/MD
CONTROL (repeatedly)*
SOUND
* By pressing CONTROL repeatedly, you can select "VCR1,"
"TAPE," "CDR" or "CDDSC" as the source.
51
VCR1 TV AUDIO
CD
FM/AM
CDR PHONO
VCR2 TAPE/MD USB
DSP SURR/DSP ANALOG/DIGITAL
OFF INPUT
BASS
∗ ∗
FRONT•L FRONT•R
1 2 3
MENU
∗ ∗
TEST CENTER SUBWFR
4 5 6
ENTER
∗ ∗
SURR•L SURR•R
8 9
7/P
∗ ∗
SBACK•L SBACK•R
0
10 +10
100 +
FM MODE
+ + +
∗
LEVEL TV VOL VOLUME
− − −
PLAY
EXIT
/REW FF/
PAUSE
SET
DOWN – TUNING – UP
STOP CONTROL
REMOTE CONTROL
Indications
TUNER
CD
CDR
PHONO
TAPE
VCR1 TAPE
CDDSC CDR
SOUND
Tuner
You can always perform the following operations:
FM/AM :Alternate between FM and AM.
After pressing FM/AM, you can perform the following operations:
1 – 10, +10
:Select a preset channel number directly.
TUNING UP/DOWN :Tune into stations.
FM MODE
:Change the FM reception mode.
Sound control section (Amplifier)
You can always perform the following operations:
SURROUND :Turn on and select Surround modes
DSP :Turn on and select DSP modes.
SURR/DSP OFF
:Turn off Surround and DSP modes.
After pressing SOUND, you can perform the following operations:
FRONT•L then LEVEL +/– :Adjust the left front speaker output
FRONT•R then LEVEL +/– :Adjust the right front speaker output
CENTER then LEVEL +/– :Adjust the center speaker output level.
SURR•L then LEVEL +/–
:Adjust the left surround speaker output
SURR•R then LEVEL +/– :Adjust the right surround speaker output
SBACK•L then LEVEL +/– :Adjust the left surround back speaker
SBACK•R then LEVEL +/–
:Adjust the right surround back speaker
SUBWFR then LEVEL +/– :Adjust the subwoofer output level.
DIGITAL EQ then LEVEL+/–
:Select the audio band and adjust its
TEST :Turn on or off the test tone output.
BASS BOOST
:Turn on or off Bass Boost function.
Note:
After adjusting sounds, press the corresponding source selecting
button to operate your target source by using the 10 keys; otherwise,
the 10 keys cannot be used for operating your target source.
CD player
After pressing CD, you can perform the following operations on the
CD player:
3 PLAY
:Start playing.
4
:Return to the beginning of the current (or previous)
track.
¢
:Skip to the beginning of the next track.
7 STOP
:Stop playing.
8 PAUSE :Pause playing. To resume press 3 PLAY.
1 – 10, +10
:Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
For channel number 5, press 5.
For channel number 15, press +10, then 5.
For channel number 20, press +10, then 10.
level. "FRL" appears on the display.
level. "FRR" appears on the display.
"CTR" appears on the display.
level. "SURRL" appears on the display.
level. "SURRR" appears on the display.
output level. "SBKL" appears on the
display.
output level. "SBKR" appears on the
display.
"S-WFR" appears on the display.
frequency level. "EQ" appears on the
display.