Sound Adjustments; Attenuating The Input Signal; Adjusting The Front Speakers Output Balance - JVC RX-7520VBK Instructions Manual

Sound Adjustments

Front Panel
Display
FM/AM TUNING FM/AM PRESET FM MODE
STANDBY
MEMORY
STANDBY/ON
INPUT
SURROUND ON/OFF
ANALOG/DIGITAL
BASS BOOST
INPUT ATT
SURROUND MODE
SPEAKERS ON/OFF
1
PHONES
INPUT ATT BASS BOOST
Once each of following settings has been adjusted, this receiver
memorizes the adjustment for each source.

Attenuating the Input Signal

When the input level of the analog source is too high, the sounds
will be distorted. If this happens, you need to attenuate the input
signal level to prevent the sound distortion.
1
Press and hold INPUT ATT
(INPUT ANALOG/DIGITAL) so
that the INPUT ATT indicator lights
up on the display.
SPK 1
ANALOG
L C R
S.WFR LFE
LS S RS
CH-
• Each time you press and hold the button, the Input Attenuator
mode turns on ("INPUT ATT ON") or off ("INPUT
NORMAL").
Note:
When selecting "DVD MULTI" as the source, this effect does not work.
RX-7520V AUDIO/VIDEO CONTROL RECEIVER
SPK 1 2 BASS BOOST TUNED STEREO AUTO MUTING SLEEP
ANALOG
DIGITAL AUTO L C R PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT VOLUME
LINEAR PCM S.WFR LFE
DIGITAL LS S RS
CH-
ADJUST
DVD MULTI DVD VCR TV SOUND
CONTROL
DOWN
2 CD TAPE/CDR FM AM
SOURCE NAME
ADJUST
CONTROL
UP 5/DOWN ∞
Remote
NOT
INPUT
ANALOG / DIGITAL
INPUT ATT
INPUT ATT
MASTER VOLUME
SETTING
UP
Adjusting the Front Speakers
Output Balance
If the sounds you hear from the front right and left speakers are
unequal, you can adjust the speakers output balance.
Before you start, remember....
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
Press ADJUST repeatedly until
"BALANCE" (with the current setting)*
appears on the display.
SPK 1
L C R
DIGITAL AUTO
LINEAR PCM S.WFR LFE
LS S RS
CH-
* "CNTR (Center)" is the initial setting. If you have already
changed the setting, another setting will be shown.
2
Press CONTROL UP 5/DOWN ∞
to adjust the balance.
• Pressing CONTROL UP 5 decreases the
left channel output from "CNTR" (Center)
to "L–21."
• Pressing CONTROL DOWN ∞ decreases
the right channel output from "CNTR" (Center) to "R–21."
Remote Control
SUBWOOFER
+/–
PTY–PTY SEARCH–PTY
SOUND
FM MODE
BASS
BOOST
Remote
NOT
ADJUST SETTING
CONTROL
DOWN UP
19