Operating Video Components - JVC RX-5020VBK Instructions Manual

Operating Video Components

IMPORTANT:
To operate JVC's video components using this remote control:
• Some JVC's VCRs can accept two types of the control signals—
remote code "A" and "B." Before using this remote control, make
sure that the remote control code of the VCR connected to the VCR
jacks is set to code "A."
• Aim the remote control directly at the remote sensor on each
component, not on the receiver.
VCR
You can always perform the following operations:
STANDBY/ON VCR
: Turn on or off a VCR.
VCR CH +/– : Change the TV channels on the VCR.
After pressing VCR (source selecting button), you can use the
following buttons for VCR operations:
3 3 3 3 3
: Start playback.
FF : Fast wind a tape.
REW
: Rewind a tape.
7 7 7 7 7
: Stop playback or recording.
8 8 8 8 8 : Pause playback. To release it, press 3 3 3 3 3 .
REC PAUSE : Press this button to enter recording pause.
Press this button then 3 3 3 3 3 to start recording.
DVD player
You can always perform the following operations:
STANDBY/ON DVD
:Turn on or off a DVD player.
After pressing DVD (source selecting button), you can use the
following buttons for DVD operations:
3 3 3 3 3
: Start playback.
4
: Return to the beginning of the current
(or previous) track.
¢
: Skip to the beginning of the next track.
7 7 7 7 7
: Stop playback.
8 8 8 8 8 : Pause playback. To release it, press 3 3 3 3 3 .
DVD menu operations
After pressing DVD (source selecting button),
you can use the following buttons for DVD
menu operations:
MENU : Display or erase the menu screen.
5 5 5 5 5 /∞ ∞ ∞ ∞ ∞ /3 3 3 3 3 /2 2 2 2 2
: Select an item on the menu screen.
ENTER : Enter a selected item.
TV
Before operating, set TV/CATV selector to TV.
You can always perform the following operations:
STANDBY/ON TV/CATV
:Turn on or off a TV.
TV/VIDEO
: Change the input mode (TV tuner and video
input).
TV VOLUME +/– : Adjust the volume.
TV/CATV CH +/– : Change the channels.
After pressing TV SOUND (source selecting button), you can use
the following buttons for TV operations:
1 – 9, 0, 100+ (+10) : Select a channel.
RETURN (10) : Function as the RETURN button.
TEST CENTER
1 2 3
EFFECT REAR L
4 5 6
MENU REAR R
7/P 8 9
ENTER SUBWOOFER
10 0 10
RETURN 100
27