Operating Other Manufacturers' Video Equipment - JVC RX-5020VBK Instructions Manual

Operating Other Manufacturers' Video Equipment

By changing the transmittable signals, you can use the remote
control supplied for this unit to operate other manufacturers'
equipment.
• Refer also to the manuals supplied with the other products.
• To operate these components with the remote control, first you
need to set the manufacturers' codes each for TV, CATV
converter, VCR and DVD player.
• After replacing batteries of the remote control, set the
manufacturers' codes again.
To change the transmittable signals for
operating a TV
1 Set TV/CATV selector to TV.
2 Press and hold STANDBY/ON
3 Press TV SOUND.
4 Enter manufacturer's code using buttons 1–9,
and 0.
5 Release STANDBY/ON
Now, you can perform the following operations on the TV.
STANDBY/ON TV/CATV
: Turn on or off the TV.
TV/VIDEO : Set the input mode (either TV or VIDEO).
TV VOLUME +/– : Adjust the volume.
TV/CATV CH +/– : Change the channels.
After pressing TV SOUND (source selecting button), you can
use the following buttons on the TV:
1 – 10, 0, +10 (100+) :Select the channels.
+10 (100+) button will be function as the
ENTER button if your TV requires pressing
ENTER after selecting a channel number.
Note:
Refer also to the manual supplied with your TV.
6 Try to operate your TV by pressing
STANDBY/ON TV/CATV.
When your TV turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
Manufacturers' codes for TV
Manufacturer
JVC
Hitachi
Magnavox
Mitsubishi
Panasonic
RCA
Samsung
Sanyo
Sharp
Sony
Toshiba
Zenith
28
TV/CATV.
TV/CATV.
Codes
01*
10
02
03
04, 11
05
12
13
06
07
08
09
*Initial setting
To change the transmittable signals for
operating a CATV converter
1 Set TV/CATV selector to CATV.
2 Press and hold STANDBY/ON
3 Press TV SOUND.
4 Enter manufacturer's code using buttons 1–9,
and 0.
5 Release STANDBY/ON
Now, you can perform the following operations on the CATV
converter.
STANDBY/ON TV/CATV
: Turn on or off the CATV converter.
TV/CATV CH +/– : Change the channels.
After pressing TV SOUND (source selecting button), you can
use the following buttons on the CATV converter:
1 – 10, 0, +10 (100+) :Select the channels.
+10 (100+) button will be function as the
ENTER button if your equipment requires
pressing ENTER after selecting a channel
number.
Note:
Refer also to the manual supplied with your CATV converter.
6 Try to operate your CATV converter by pressing
STANDBY/ON TV/CATV.
When your CATV converter turns on or off, you have entered
the correct code.
If there are more than one code listed for your brand of
CATV converter, try each one until the correct one is entered.
Manufacturers' codes for CATV converter
Manufacturer
Echostar
General Instrument
Hamlin
Pioneer
RCA
Scient
Sony
Zenith
TV/CATV.
TV/CATV.
Codes
01*
02, 03, 04, 05,
06, 07, 08, 09
16, 17, 18, 19
14, 15
20
10, 11
21
12, 13
*Initial setting