Paper Auto-Size Sensor Removal; Paper Path Redrive Assembly With Sensors Removal - Lexmark C792 series Service Manual

Paper auto-size sensor removal

See "Front" on page 7-7
1.
Remove the standard media tray. See
2.
Push down on the sensor to remove it from the rear frame, and then disconnect the cable (A).

Paper path redrive assembly with sensors removal

See "Left (continued)" on page 7-13
1.
Remove the OP panel. See
2.
Remove the main fan. See
3.
Remove the fuser. See
for the part number.
"Standard media tray removal" on page
for the part number.
"Operator panel (OP) assembly removal" on page
"Main fan removal" on page
"Fuser assembly removal" on page
A
4-92.
4-63.
5062
4-150.
4-110.
4-117
Repair information
Previous
Next
Go Back