Finisher Or Stacker Sensor (Bin-Full Receive) Removal - Lexmark C792 series Service Manual

Finisher or stacker sensor (bin-full receive) removal

See "Finisher/High-capacity output stacker assembly" on page 7-25
1.
Remove the option from the printer.
2.
Remove the option rear cover. See
3.
Remove the two screws (A) securing the sensor.
4.
Disconnect the cable, and remove the sensor.
"Finisher or stacker rear cover removal" on page
for the part number.
4-269.
Repair information
5062
Previous
Next
Go Back
4-271