Mpf Paper Out Sensor Error Service Check - Lexmark C792 series Service Manual

938.16—MPF paper out sensor error service check
Step Questions / actions
1 Turn the printer off, and open the system
board shield. Check the cable in connector
JMPF1(MPF sensor cable) for proper
connection to the system board.
Is the cable properly connected?
2 Check the cable in the JMPF1(MPF sensor
cable) connector for damage.
Is the cable damaged?
3 Remove the MPF sensor plate assembly. See
"MPF sensor plate assembly removal" on
page 4-108.
Check the cable connected to the sensor.
Is the cable properly connected?
4
Replace the MPF sensor plate assembly. See
"MPF sensor plate assembly removal" on
page 4-108.
Does the error reoccur?
A
Yes
Go to step 2.
Replace the MPF sensor
cable. See "MPF sensor
cable" on page 7-56.
Go to step 4.
Replace the system board.
See "System board
removal" on page 4-151.
5062
No
Reseat the cable.
Go to step 3.
Reseat the cable.
Problem solved.
2-135
Diagnostic information
Previous
Next
Go Back