Micom Software Upgrading Order
5) Measures to Take if a "Trying to Connect" Message Repeatedly Appears
- Check if the connection is normal by pressing the "Check Connection" button.
6) Troubleshooting and Solution for Other Problems
- Bootloader of SOC Micom is damaged. → Change PCB.
- PBA is damaged. → Change PBA.
- Problem found in the upgrade kit. → Change the upgrade kit.
- Problem found in a cable (USB/Power/10-pin flat cable) → Change the relevant cable.
Samsung Electronics
(cont.)
1
1
2
Troubleshooting
2
4-8