Micom Software Upgrading Order - Samsung MWR-WE10 Service Manual

4-3-3 Micom Software Upgrading Order

1) Connect the upgrade kit to the PCB download port.
2) Set the G-man programmer (download program).
- Select a COM port and set the Baud rate at 115200bps.
- Select "Indoor."
- Select the Micom software to download by pressing the "Select File" button.
- Start downloading by pressing the "Download" button.
Samsung Electronics
1
2
2
1. Only SoC software version from Mar. 14 2008 or later can be used.
2. Can't be upgraded with empty software in the Soc.
① USB-RS232 Cable
3
② Power Cable
③ 10-pin flat cable
3
Troubleshooting
5
4
4-6