Switching the display information on the playback
screen
You can disable the display of picture information (file number, etc.) and recording
information (settings used for recording, etc.) when a picture is played back.
1
Press [DISP.] button to switch the display
• The display is switched as shown below.
*
1
With information
*
1
If you do not perform any operation for approximately 1 minute or longer, some of the information
on the screen is turned off. To display the information again, press the [DISP.] button.
*
2
During Playback Zoom, Motion Picture Playback, Automatic Scrolling Playback of panorama
pictures, continuous playback or Slide Show: You can only turn the display on or off.
*
3
This screen is displayed only when [Highlight]
●
A histogram of each color, including R (red), G (green), B (blue), and Y (luminance), is separately
displayed during playback.
●
During Multi Playback or calendar screen: Display cannot be changed.
71
Detailed information
*
2
display
AM10:00 DEC. 1.2014
100-0001
(→72)
*
2
Histogram display
R
G
B
Y
1/98
100-0001
in the [Custom] menu is set to [ON].
Basics
Without
*
*
*
1,
2,
3
information
Without information
SQW0021