[Video Divide] - Panasonic Lumix DMC-LX100 Owner's Manual

[Video Divide]

A single motion picture can be split into 2 parts. This is convenient when you want to keep
just the necessary scenes, or if you wish to delete unnecessary scenes to increase free
space on your card, such as when traveling.
1
Set the menu
→
2
Use to select a motion picture to split and press [MENU/SET]
3
Press at where you want to split a motion picture to pause it
• If you press
motion picture.
• If you press
pause.
4
Press
• A confirmation screen is displayed. Select [Yes] and press
[MENU/SET].
• The original motion picture that was split does not remain.
(There will only be the 2 motion pictures that were created after
the split.)
●
During dividing, do not turn off the camera or remove the card or battery. If you do so, the motion
picture may be deleted.
●
If you divide a motion picture recorded in [MP4] when the picture display sequence is set to [FILE
NAME], the order of the pictures will change. It is recommended to set the display sequence to
[DATE/TIME] or to display using [Calendar].
Not available in the following cases:
●
Motion pictures cannot be divided at a location close to the start or end of the motion picture.
●
Motion pictures with a short recording time cannot be divided.
214
[Playback] → [Video Divide]
while paused, you can make finer adjustments to the splitting positions in a
again, the motion picture is played back from the last position prior to activating
Playing Back and Editing Pictures
Using the [Playback] menu
SQW0021