Changing The Connection Method - Panasonic Lumix DMC-LX100 Owner's Manual

Changing the connection method

To change the connection method, press
the [DISP.] button and select the connection
method.
■
When connecting with [Via Network]
(On the camera)
Select [Via Network] and press [MENU/SET]
• Connect the camera to a wireless access point by following the connection method (→264).
(On your smartphone)
Set Wi-Fi function to "ON"
Select the wireless access point you connected to the camera, and set
Start "Image App"
■
When connecting with [Direct]
(On the camera)
Select [Direct] and press [MENU/SET]
• Select [Wi-Fi Direct] or [WPS Connection], and connect the camera to the smartphone by
following the connection method (→267).
(On your smartphone)
Start "Image App"
Closing the connection
After use, close the connection with the smartphone.
(On the camera)
1
Press [Wi-Fi] button
(On the recording standby screen, you can also close the connection by pressing
→
2
Select [Terminate the Connection]
• A confirmation screen is displayed. Select [Yes] and press [MENU/SET].
(On your smartphone)
3
Close "Image App"
<Using an iOS device>
From the "Image App" screen, press the home button on the smartphone to close the app
<Using an Android device>
From the "Image App" screen, press the back button on the smartphone twice to close the app
232
Operating the camera by connecting it to a smartphone
(→228)
(→228)
[Setup] → [Wi-Fi] → [Wi-Fi Function] → [Yes].)
Wi-Fi
SQW0021