[Raw Processing] - Panasonic Lumix DMC-LX100 Owner's Manual

[RAW Processing]

You can use the camera to develop still pictures that were recorded in RAW format.
The created still pictures are saved in JPEG format. You can develop the pictures while
confirming the effects on the screen.
1
Set the menu
→
2
Press to select RAW file and press [MENU/SET]
3
Press to select the item
• The following items can be set. The settings used during recording are applied at the time of
setting.
[White Balance]
[Exposure Comp.]
[Photo Style]
[i.Dynamic]
[Contrast]
[Highlight]
[Shadow]
[Saturation] /
[Color Tone]
[Filter Effect]
[Noise Reduction]
[i.Resolution]
[Sharpness]
[Setup]
208
[Playback] → [RAW Processing]
You can select White Balance to make adjustments. When you select an
item with [ ], you can develop the pictures using the same settings that
were applied for recording.
You can perform Exposure Compensation in the range from –1 EV to
+1 EV.
You can select the [Photo Style] effects ([Standard], [Vivid], [Natural],
[Monochrome], [Scenery], or [Portrait]).
You can select the [i.Dynamic] settings ([HIGH], [STANDARD], [LOW], or
[OFF]).
You can adjust the contrast.
You can adjust the brightness of a highlighted area.
You can adjust the brightness of a shadowed area.
You can adjust the saturation. (You can adjust the coloring when
[Monochrome] is selected for [Photo Style].)
You can select a Filter effect. (Only when [Monochrome] is selected for
[Photo Style])
You can set noise reduction.
You can select the [i.Resolution] settings ([HIGH], [STANDARD], [LOW],
[EXTENDED], or [OFF]).
You can adjust the impression of resolution.
You can perform the following settings.
[Reinstate Adjustments]: You can restore the settings to the ones used
[Color Space]: You can select [Color Space] from either [sRGB] or
[Picture Size]: You can select the picture size ([L], [M], or [S]) of a JPEG
Playing Back and Editing Pictures
during recording.
[Adobe RGB].
file when saving pictures.
Using the [Playback] menu
SQW0021