Changing The Settings Assigned To The Control Ring - Panasonic Lumix DMC-LX100 Owner's Manual

Changing the settings assigned to the control ring

Changes the settings assigned to the control ring.
1
Set the menu
→
2
Use to select the setting and press [MENU/SET]
Settings that can be assigned
[DEFLT] [Normal]
[Zoom] (→170)
[Step Zoom]
[Sensitivity]
[White Balance]
[Filter Select]
[OFF] [Not Set]
●
The assigned function setting applies to all the Recording Modes.
The function assigned to the control ring may not work in some combinations of Recording Mode
or settings used for recording (panorama picture recording, Filter setting, etc.).
●
When Manual Focus is set, the control ring is fixed to the function for adjusting the focus. You
cannot use the settings assigned using the [Control Ring].
40
[Custom] → [Control Ring]
(→174)
(→136)
(→103)
(→89)
Changing settings using the control ring
• To return to the default setting, select [Normal].
(→39)
• If you do not use the control ring, select [OFF]
([Not Set]).
(→128)
Preparations
SQW0021