Before Using Bluetooth Function; How To Connect To A Bluetooth Compatible Device (Pairing); Pairing A Bluetooth Compatible Device With Ssp (Secure Simple Pairing); Pairing A Bluetooth Compatible Device Without Ssp (Secure Simple Pairing) - Alpine CDE-148EBT Operating Instructions Manual

Before Using BLUETOOTH Function

Before using the BLUETOOTH function, the following settings need to
be made.
Set "Bluetooth IN" to ON when you want to use
Hands-Free phone or Bluetooth Audio function. Refer to
"Setting the BLUETOOTH Connection (Bluetooth IN)" on
page 28.
Note
• Before using BLUETOOTH function, it must be paired with this unit.
Refer to "How to connect to a BLUETOOTH compatible device
(Pairing)" on page 28.
How to connect to a BLUETOOTH
compatible device (Pairing)
For details on the control from a BLUETOOTH compatible device, refer
to the Owner's Manual of the BLUETOOTH compatible device.
Pairing a BLUETOOTH compatible device with
SSP (Secure Simple Pairing)
1
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver" for pairing.
2
Turn the Rotary encoder to change the head unit display
from "Pairing NO" to "Pairing YES", and then press
ENTER.
If "Pairing NO" is selected, the connection will be cancelled.
3
If the pairing was successful, "Connected" is displayed for
a few seconds. The head unit then returns to its previous
state.
Pairing a BLUETOOTH compatible device without
SSP (Secure Simple Pairing)
1
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver" for pairing.
2
Input the passcode ("0000") in a BLUETOOTH compatible
device.
Note
• The passcode is fixed as "0000".
3
If the pairing was successful, "Connected" is displayed for
a few seconds. The head unit then returns to its previous
state.
Notes
• If the connection is unsuccessful, "Failed" is displayed.
• After a successful pairing, the two devices should connect automatically
whenever the vehicle's ignition is turned ON. If the auto connection
fails, try to reconnect manually.
• Set "Visible Mode" to ON to enable this unit to be recognised by a
BLUETOOTH compatible device, refer to "Setting the Visible Mode" on
page 29.
• You can also manually pair the BLUETOOTH devices from this unit.
For details, refer to "Pairing a BLUETOOTH Device from the unit" on
page 29.
28
-EN

BLUETOOTH SETUP

The following steps 1 to 5 are common to the various BLUETOOTH
functions. For details, refer to each individual function.
Note
• Set "Bluetooth IN" to ON, and then perform BLUETOOTH SETUP
operation. Refer to "Setting the BLUETOOTH Connection (Bluetooth
IN)" on page 28.
1
Press and hold AUDIO/SETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select "Bluetooth", and then
press ENTER.
The BLUETOOTH setup mode is activated.
3
Turn the Rotary encoder to select the desired items and
then press ENTER.
BLUETOOTH:
*1
 Paired Device
Bluetooth IN
*1/*2
 Call Sound
Device
*2
 Auto Answer
PB Order
*2 *2
 FW Version
Select
*1 The items are not displayed during a phone call.
*2 The items are not displayed if "Bluetooth IN" is set to OFF.
Refer to "Setting the BLUETOOTH Connection (Bluetooth
IN)" on page 28.
4
Turn the Rotary encoder to change the settings.
5
Press and hold AUDIO/SETUP for at least 2 seconds.
The SETUP mode is cancelled.
Notes
• Press r to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting the BLUETOOTH Connection
(Bluetooth IN)
With BLUETOOTH technology, you can place a hands-free call by a
BLUETOOTH-equipped Smartphone.
Audio information of a BLUETOOTH compatible Smartphone, a
portable audio player, etc., is controllable/playable wirelessly from this
unit.
 Setting item: Bluetooth IN
Setting contents:
OFF / ON (Initial setting)
OFF:
Hands-Free Phone function and Bluetooth Audio function are not
used.
ON:
Select when you want to pair your BLUETOOTH compatible phone
with this unit or use Bluetooth Audio function.
Note
• When BT IN is set to OFF, the indicators related to Hands-free phone
(C battery quantity and i signal strength) will not be displayed.
*2 *1/*2
 Visible Mode  Search
*2 *2 *1/*2
 Caller ID  PB Update
*2 *2
 Service Name  Speaker
*1/*2
 FW Update  Bluetooth IN
