Seat Adjustment; Ground Speed Control Lever Adjustment; Speed Balancing Adjustment - Ferris IS1500Z Series Operator's Manual

Zero-turn riding mower
Hide thumbs Also See for IS1500Z Series:
Table of Contents

Advertisement

Seat Adjustment

See Figure 28. The seat can be adjusted forward
and back. Move the lever towards the left, position
the seat as desired, and release the lever to lock the
seat into position.

Ground Speed Control Lever Adjustment

The control levers can be adjusted in three ways. The
alignment of the control levers, the placement of the
levers (how close the ends are to one another) and
the height of the levers can be adjusted.
To Adjust the Handle Alignment
Loosen the mount bolts (A, Figure 29) and pivot the
lever(s) (C) to align with each other.
To Adjust the Handle Placement
Loosen the jam nuts and adjust the placement bolt
(B, Figure 29) in or out to properly adjust the lever
end spacing.
To Adjust the Handle Height
Remove the mounting hardware and reposition the
handle either up or down from its original position.
You will need to readjust the handle alignment as
described above.

Speed Balancing Adjustment

If the rider veers to the right or left when the ground
speed control levers are in the maximum forward
position, the top speed of each of these levers can
be balanced by turning the adjustment bolt(s) (A,
Figure 30). Only adjust the speed of the wheel that is
traveling faster.
To Reduce the Speed of the Faster Wheel
1. Loosen the securing nut.
2. Turn the top speed adjustment bolt COUNTER-
CLOCKWISE to reduce the speed.
3. Retighten the securing nut when adjustment is
complete.
WARNING
DO NOT adjust the tractor for a faster overall
speed forward or reverse than it was designed
for.
Regular Maintenance
Figure 28. Seat Adjustment
A
B
Figure 29. Control Lever Adjustment
A. Alignment Hardware
B. Placement Hardware
C. Ground Speed Control Lever
A
Figure 30. Top Speed Adjustment
A. Top Speed Adjustment Bolt
B. Control Lever Base
Seat Adjustment
Lever
C
B
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

590083259008335900836590087759005765900589

Table of Contents