Safety Interlock System; Usa Safety Icons - Ferris IS1500Z Series Operator's Manual

Operator Safety

Safety Interlock System

This unit is equipped with safety interlock switches.
These safety systems are present for your safety,
do not attempt to bypass safety switches, and never
tamper with safety devices. Check their operation
regularly.
Operational SAFETY Checks
Test 1 — Engine should NOT crank if:
• PTO switch is engaged, OR
• Parking brake is not engaged, OR
• Motion control handles are not in the NEUTRAL
position.
Test 2 — Engine SHOULD crank if:
• PTO switch is NOT engaged, AND
• Parking brake is engaged, AND
• Motion control handles are locked in the
NEUTRAL position.
Test 3 — Engine should SHUT OFF if:
• Operator rises off seat with PTO engaged, OR
• Operator rises off seat with parking brake
disengaged.
• Operator moves motion control handles out of
their neutral positions before disengaging parking
brake.
Test 4 — Blade Brake Check
Mower blades and mower drive belt should come
to a complete stop within seven (7) seconds after
electric PTO switch is turned off (or operator rises off
seat). If mower drive belt does not stop within seven
(7) seconds, see your dealer.
NOTE: Once the engine has stopped, PTO switch
must be turned off, parking brake must be engaged,
and the motion control handles must be locked in the
NEUTRAL position after the operator returns to the
seat in order to start the engine.
WARNING
If the unit does not pass a safety test, do not
operate it. See your authorized dealer. Under
no circumstance should you attempt to defeat
the purpose of the safety interlock system.
12

USA Safety Icons

Alert Toxic Fumes
Amputation -
Fire Hazard
Rotating Parts
Thrown Objects Hot Surface
Overhead
Rollover Hazard
Obstacles
Keep Children
Slippery Slopes
Away
Read the Open Flame
Manual Hazard
Amputation -
Amputation -
Foot In Blade
Hand In Blade
Wear Protective
Pinch Point
Gear
Tipover Dropoffs
Rollover Overhead
Hazard Obstacles
www.ferrisindustries.com