Removing Poster Board - Epson SureColor T-Series User Manual

Epson SureColor T-Series User's Guide
After positioning the media, press the Z
10
button.
The paper will be fed into the printer.
Check the media type.
11
The display shows the type of paper currently
selected with the printer. To print with the
displayed settings, use the d/u buttons to select
Keep Settings Above, and press the Z button.
To change the settings, select Change Settings,
and press the Z button.
Changing Media Settings" on page 43

Removing Poster Board

This section describes how to remove poster board
when printing is complete.
Note:
To remove paper that was loaded but not used, press the
( button and select Remove Paper.
Buttons that are used in the following settings
Confirm that Paper Eject is displayed in the
1
control panel.
Keeping a hand on the poster board to prevent it
falling from the printer, press the Z button.
Pull the poster board forward as shown in the
2
on-screen instructions.
After removing the poster board, press the Z
button.
Basic Operations
U"Viewing and
42
Important:
c
If poster board will not be used in the next
print job, lower all the poster board
supports. Leaving the supports raised may
cause paper to jam.
To lower the supports, grasp them as shown,
pull them diagonally downward, and then
release.