Printing Cad Drawings; Printing In The Cad / Line Drawing Mode Of The Printer Driver - Epson SureColor T-Series User Manual

Epson SureColor T-Series User's Guide

Printing CAD Drawings

The printer supports the HP-GL/2 driver and HP RTL
(Raster Transfer Language) used in plotters. You can
use one of the following methods to print CAD
drawings with this printer.
O Print in the CAD / Line Drawing mode of the
included printer driver.
O Print while emulating HP-GL/2 and HP RTL,
which are used in plotters.
Whether the printer prints normally or prints while
emulating HP-GL/2 and HP RTL is determined and
selected automatically by the print data sent. If
operation mode switching and printing are not
performed correctly, open the Setup menu and set
Printer Mode to HP-GL/2.
Printing in the CAD / Line
Drawing mode of the printer
driver
When you will print a CAD drawing with Windows
applications software, we recommend printing in the
CAD / Line Drawing mode of the printer driver.
Windows
Open the Printer Settings tab of the printer
1
driver. Set Print Quality to Select Target, and
then select CAD / Line Drawing (Black), CAD
/ Line Drawing (Color) or CAD / Line
Drawing (Bi-Level).
More Ways to Print
Note:
The CAD / Line Drawing (Black), CAD / Line
Drawing (Color) , and CAD / Line Drawing
(Bi-Level) options are available for Select Target
when a paper type suited to printing CAD
drawings is selected.
Check other settings, and then start printing.
2
Mac OS X
Display the print dialog and select Printer
1
Settings from the list.
U"Basic Printing Methods (Mac OS X)" on
page 60
Set Mode to Select Target, and then select CAD
2
/ Line Drawing (Black), CAD / Line Drawing
(Color), or CAD / Line Drawing (Bi-Level).
Note:
The CAD / Line Drawing (Black) and CAD /
Line Drawing (Color) options are available for
Select Target when a paper type suited to printing
CAD drawings is selected.
Check other settings, and then start printing.
3
86