Toshiba e-studio 2555c Troubleshooting Manual page 29

1.TROUBLESHOOTING FOR THE HARDWARE
2
Remove the misfed paper.
3
Open the cover holding the handle of the Bridge Unit.
When the Hole Punch Unit is installed, proceed to step 5.
4
Remove the misfed paper.
Proceed to step 8.
When the Hole Punch Unit is installed
5
Open the Hole Punch Unit cover.
6
Turn the green knob to get the misfed paper out.
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 27