Lighting Burner; To Turn Off Gas - Vermont Castings Lexington LX32DV Installation And Operating Instructions Manual

opeRAtING INStRuctIoNS
MAIN BuRNeR SWItch
The "ON/OFF/RS" switch for the main burner can be found behind door of the
fireplace. This switch allows you to turn on and to turn off the main burner without
using the gas valve knob. Make sure the button is in the "ON" position to light
the main burner. Figure 50
LIGhtING the BuRNeR
Depress and turn the knob counterclockwise
51. It will take less than four (4) seconds for the burner to ignite.
pILot poSItIoN
Depress and turn knob to pilot position to keep burner off while maintaining the
pilot light. Figure 52
Depress and turn knob clockwise
the control is fitted with a safety interlock
device which prevents unsafe ignition of the
pilot burner after the control knob has been
turned to the oFF position. the knob may
only be rotated back to the pILot position
after the safety magnet has been released
(approximately 60 seconds). you will hear a
"click" when the safety magnet releases.
51D0528

LIGhtING BuRNeR

to the "ON" position. Figure
P I L
O T
Figure 52 -
Pilot Position

to tuRN oFF GAS

FP1935
control knob pilot
to "OFF" position. Figure 53
LX Series Direct Vent Gas Fireplace
Figure 50 -
On/Off/RS Switch
P I L
O T
Figure 51 -
On Position
FP1937
control knob on
P I L
O T
Figure 53 -
Off Position
35