Lighting Burner; To Turn Off Gas; Adjust Blower Speed - Vermont Castings 380IDVNVSB Installation And Operating Instructions Manual

OPERATING INSTRUCTIONS
MAIN BURNER SWITCH
The "ON/OFF" switch for the main burner can be found on the right side of insert surround. This
switch allows you to turn on and to turn off the main burner without using the gas valve knob.
Make sure the button is in the "ON" position to light the main burner.
LIGHTING THE BURNER
Depress and turn the knob counterclockwise
(4) seconds for the burner to ignite.
PILOT POSITION
Depress and turn knob to pilot position to keep burner off while maintaining the pilot light.
O N
F
O F
On/Off Switch
Depress and turn knob clockwise
position.
ADJUSTING BLOWER SPEED
The internal blower helps transfer heat from heater into room.
It will not turn on until heater is up to temperature (approxi-
mately 10 minutes after starting).
To turn blower off, turn knob all the way counterclockwise
. One click clockwise turns blower to high speed.
Turning knob clockwise
speed of blower.
20306756

LIGHTING BURNER

P I L
On Position

TO TURN OFF GAS

FP1937
to "OFF"
control knob on
from high position decreases
to the "ON" position. It will take less than four
O T
Off Position
Blower Knob
380IDV Fireplace Insert
P I L
O T
Pilot Position
P I L
O T
FP1939
fan control knob
27