Securing Fireplace To Floor Or Framing; Finishing Material - Vermont Castings CDVR33n Installation And Operating Instructions Manual

SeCuRe FIReplaCe To FlooR oR FRaMInG
The fireplace must be secured to the
floor and/or to framing studs as shown
in Figure 7. Use two () wood screws
or masonry/ concrete screws to secure
fireplace to the floor. Use four (4) screws
to attach fireplace to framing. The side
nailing flanges are 1/" or 5/8" to accom-
modate different wall thickness.
Figure 7 -
Securing Fireplace to Floor and
Framing Studs (CDVT36 shown)

FInIShInG MaTeRIal

noTe: Any wiring (i.e. remote control, wall switch, and
optional fan) must be done prior to final finishing to avoid
costly reconstruction.
Only noncombustible materials (i.e. brick, tile, slate, steel,
or other materials with a UL fire rating of Zero) may be
used to cover the black surface of the appliance. A 300°F
minimum adhesive may be used to attach facing materials
to the black surface. If joints between the finished wall
and the fireplace surround are sealed, a 300°F minimum
sealant material (General Electric RTV103 or equivalent)
must be used.
69D3011
Framing
Nailing
Flange
Screws
Nailing
Flange
Screw
CDVSC7 & CDV7 Series Gas Fireplace
Screw
FP2287
secure fireplace
Drywall Support Tabs (Do
Not Use for Framing or
Header)
Framing
Screw
Nailing
Flanges
Screw
FP87
11