Printer Interface Options [All Models]; Drivers And Software [All Models]; Firmware Upgrade [All Models]; Supplies [All Models] - Ricoh G112 Service Manual

1.2.4 PRINTER INTERFACE OPTIONS
1. Ethernet (G112/G094 models only): Section two of the Set-up Guide.
2. IEEE1394: Section two of the Set-up Guide.
3. IEEE802.11b: Section two of the Set-up Guide.
4. Bluetooth: Section two of the Set-up Guide.
NOTE: The Ethernet is standard for the G113/G116 and G091/G116 models.

1.2.5 DRIVERS AND SOFTWARE [ALL MODELS]

Refer to section 4 of the Set-up Guide for installation procedures.

1.2.6 FIRMWARE UPGRADE [ALL MODELS]

Refer to section 5.4 of the Service Manual.

1.3 SUPPLIES [ALL MODELS]

• Maintenance kit (NOTE: The G094/G095 and G112/G113 Maintenance
Kits are not interchangeable. The same applies to the G094 versus the
G116 Maintenance Kits. Use the Maintenance Kit that is unique to each
model.)
• AIO (NOTE: The G094/G095 AIO can be used in the G112/G113 models,
and vice versa. The same interchangeability applies to the G091 and
G116 AIO cartridges.)
SM
SUPPLIES [ALL MODELS]
1-3 G112/G113/G116/G094/G095/G091