Releasing Plastic Latches [All Models]; After Servicing The Machine [All Models]; Special Tools [All Models] - Ricoh G112 Service Manual

3.1.2 RELEASING PLASTIC LATCHES [ALL MODELS]

Many of the parts are held in place with plastic latches. The
latches break easily, so release them carefully.
To remove such parts, press the hook end of the latch away from
the part to which it is latched.

3.1.3 AFTER SERVICING THE MACHINE [ALL MODELS]

1. Make sure all parts that require grounding are properly grounded.
2. Make sure the interlock switch is functioning.
3. Do not leave unused parts inside the machine.
4. Do not leave any tools inside the machine.
5. Make sure all wires are properly connected and routed.
6. Make sure wires are not jammed between parts of the machine.
7. Print a configuration sheet to verify machine operation. (See Printer Reference
Guide for procedure.)
3.2 SPECIAL TOOLS
Part Number
N8036701 Flash Memory (PCMCIA) Card - 4MB
N8031000 Flash Memory (PCMCIA) Card Case
B6456700 PCMCIA Card Adapter
A0069104 Scanner Positioning Pin (4 pieces/set)
B6455010 SD Card Kit (64MB)
B6456800 USB Reader/Writer
G0219350 Loop Back Connector
SM
Description
3-3
SPECIAL TOOLS
Q'ty Remarks
Used in common with other printers.
1
(Use with G094/G095/G091)
Used in common with other printers.
1
(Use with G094/G095/G091)
Used to allow SD card download/
1 upload via a PCMCIA card slot.
(Use with G112/G113/G116)
Used for LD Unit positioning. Used
1
in common with the G073 series
and other models.
1
Used for service activities (firmware
update, etc.). (Use with G112/G113/
G116)
1 For use with SD Card Kit (Use with
G112/G113/G116)
1 Used in common with other printers.
G112/G113/G116/G094/G095/G091
G094R513.WMF