8.30 Engine PCB ASSY
(1) Disconnect the eleven connectors (CN1, CN2, CN4, CN6, CN7, CN8, CN9, CN10, CN11,
CN14, CN15) and one flat cable (CN3) from the Engine PCB ASSY.
Note:
- After disconnecting the flat cable(s), check that each cable is not damaged at its end
or short-circuited.
- When connecting the flat cable(s), do not insert it at an angle. After insertion, check
that the cable is not at an angle.
(2) Remove the four Taptite cup S M3x6 SR screws, and then remove the Engine PCB ASSY
from the Side frame L.
Side frame L
Taptite cup S M3x6 SR
<Left side>
CN13
CN11
CN10
CN9
CN8
CN7
CN6
Fig. 5-97
Fig. 5-98
5-88
Engine PCB ASSY
CN14
CN15
CN1
CN2
CN3
CN4
CN5
Engine PCB ASSY
Confidential