3.19
Base Plate
(1) Turn the main frame upside down.
(2) Remove the five bind B M4x10 Taptie screws and four cup S tite 3x6 screws from the
base plate.
(3) Slide the base plate to the rear of the printer to remove it.
Main frame
3.20
Engine PCB ASSY / High-voltage Power Supply PCB ASSY
(1) Remove the two bind B M4x10 Taptite screws to remove the PCB insulation sheet.
Main frame
Taptite, bind B M4x10
Fig. 4-85
Taptite, bind B M4x10
Fig. 4-86
4-49
&+$37(5 ',6$66(0%/< $1' 5($66(0%/<
Screw, cup S tite 3x6
Base plate
Screw, cup S tite 3x6
PCB insulation sheet