Brother HL-3040CN Service Manual page 421

WORKER SWITCH (WSW)
This appendix describes the functions of the worker switches.
It is not allowed to access all of those selectors, but it is allowed to access the selectors shaded in
the worker switch table.
Worker switch
■
WSW No.
WSW47
WSW54
WSW55
WSW56
WSW59
WSW63
WSW64
WSW65
WSW66
WSW67
WSW68
WSW70
WSW73
Switching between high-speed USB and full-speed USB
PictBridge command delay time (HL-3070CW only)
Interval of time required for the developing bias voltage
correction
"Last Job Reprint" function setting
Switching of the display for the coverage of toner cartridge
Switching of the CPU sleep mode
Enabling and disabling of transmission of USB serial number
(SN)
Font support for Israel
Default paper size
Default media type
Support for Bond paper
Support for Hagaki
Support for Label
Reserved (Change of the setting is prohibited)
Reserved (Change of the setting is prohibited)
Reserved (Change of the setting is prohibited)
Reserved (Change of the setting is prohibited)
Reserved (Change of the setting is prohibited)
Function
App.1-1
Refer to:
App. 1-2
App. 1-2
App. 1-3
App. 1-4
App. 1-4
App. 1-5
App. 1-5
App. 1-5
App. 1-6
App. 1-6
App. 1-6
App. 1-6
App. 1-6
Confidential